24
Audio Design Associates
www.ada-usa.com
NOTE: The Suite 7.1 remembers the last tone setting that was selected even after you turn the unit off
or change an input. You can override the previous tone setting by selecting a different tone preset.
Therefore, you may want to consider having one of the tone presets completely flat (no channels
selected for equalization or all levels set to 0 dB) for a zero reference point.
Individual Channel Balance Levels
The balance feature of the Suite 7.1 allows you to adjust the level for each of the eight output channels
and store them into four different memory recalls. This feature allows you to quickly adjust levels to
accommodate different seating locations within the listening area thus allowing you to recall four
different “sweet spots”. As with the tone presets, the Suite 7.1 remembers the last balance setting that
was selected even if the input was changed or the unit was turned off.
Storing Individual Channel Levels
1. Press and hold the Mode knob until the display changes to the Tone, Balance, and Volume recall
setup. The cursor will flash over the T in TONE.
2. Rotate the Mode knob until the cursor is over the B in T/B/VOL SET.
3. Press the Mode knob. The display will show the eight channels and their current levels. The cursor
will flash over the S in STR1.
4. Rotate the Input knob clockwise until the cursor is flashing over the L in LEFT.
5. Rotate the Input knob clockwise to increase the channel level or counterclockwise to decrease the
channel level in 0.5 dB increments.
6. Repeat steps 4 and 5 for each of the eight channels.
7. Once you have adjusted all channels, rotate the Input knob until the cursor reaches the S in STR1.
8. Press the Input knob to store the channel levels into memory.
9. Repeat steps 3 through 8 to store up to four level presets into memory.
Recalling the Stored Balance Presets
Once the balance presets are stored into memory, they can be easily recalled. In most cases, you will
access a balance preset with a single press of a button on a remote control, touchscreen, or even in a
macro. However, you can access the balance preset recall from the front panel by the following method:
1. Press and hold the Mode knob until the display changes to the Tone, Balance, and Volume recall.
2. Rotate the Mode knob until the cursor is flashing over the B in BAL RECALL1.
3. Rotate the Input knob until the desired balance preset recall number is displayed
4. Press the Mode knob. The display will flash B RECALLED and the recall number on the top row.
Setting Master and Maximum Volume Levels
You can also store master volume levels as well as maximum volume into as many as four preset levels.
These preset levels can be easily recalled in the same way as tone and balance presets and are useful if
you want to select an optimum volume level with the single touch of a button. The maximum volume
feature lets you establish a safe volume level to protect your speakers.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales