10
Audio Design Associates
www.ada-usa.com
Connecting the Audio Cables from the Suite 7.1 to each Amplifier Channel
1. Plug an interconnect cable from the left (L) output jack of the Suite 7.1 into channel 3 of the
PTM-8150. When using a different amplifier, use its optimum channel.
2. Plug an interconnect cable from the center (C) output jack of the Suite 7.1 into channel 4 of the
PTM-8150. When using a different amplifier, use its optimum channel.
3. Plug an interconnect cable from the right (R) output jack of the Suite 7.1 into channel 5 of the
PTM-8150. When using a different amplifier, use its optimum channel.
4. Plug an interconnect cable from the left surround (LS) output jack of the Suite 7.1 into channel 2
of the PTM-8150. When using a different amplifier, use its optimum channel.
5. Plug an interconnect cable from the right surround (RS) output jack of the Suite 7.1 into channel
6 of the PTM-8150. When using a different amplifier, use its optimum channel.
6. Plug an interconnect cable from the surround back left (SBL) output jack of the Suite 7.1 into
channel 1 of the PTM-8150. When using a different amplifier, use its optimum channel.
7. Plug an interconnect cable from the surround back right (SBR) output jack of the Suite 7.1 into
channel 5 of the PTM-8150. When using a different amplifier, use its optimum channel.
8. Plug an interconnect cable from the subwoofer (SUB) output jack of the Suite 7.1 into channel 8
of the PTM-8150. If you are using a powered subwoofer connect the subwoofer out to its input.
Composite Video Output Connections
There are two NTSC composite video output connections on the Suite 7.1. These RCA output jacks
are used to connect to the video monitors. The composite video output jacks are identified on the rear
of the Suite 7.1 by their reversed black background.
Required Input Cables
You will need a RG-6 or other 75 Ω video cable terminated with RCA jacks for each of the composite
video outputs.
Connecting the Composite Video Output of the Suite 7.1 to the Input of the Television Monitor
1. Plug one end of a video cable into the composite video output 1 of the Suite 7.1.
2. Plug the other end of this cable into the NTSC composite video input of your monitor.
3. Repeat steps 1-2 for additional NTSC monitors.
S-Video Output Connections
There are two S-Video output connections on the Suite 7.1. These output jacks are used to connect to
the video monitors with S-Video inputs. The S-Video output jacks are identified on the rear of the
Suite 7.1 by their reversed black background.
Required Cables
You will need a S-Video cable terminated with 5-pin DIN connectors at each end for each monitor
input you will be using.
Connecting the S-Video Output to the S-Video Monitor
1. Plug one end of an S-Video cable into either S-Video output of the Suite 7.1.
2. Plug the other end of this cable into the NTSC composite video input of your monitor.
3. Repeat steps 1-2 for an additional monitor.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales